1	#
     2	# This is the main Apache HTTP server configuration file.  It contains the
     3	# configuration directives that give the server its instructions.
     4	# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
     5	# In particular, see 
     6	# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
     7	# for a discussion of each configuration directive.
     8	#
     9	# Do NOT simply read the instructions in here without understanding
    10	# what they do.  They're here only as hints or reminders.  If you are unsure
    11	# consult the online docs. You have been warned.  
    12	#
    13	# Configuration and logfile names: If the filenames you specify for many
    14	# of the server's control files begin with "/" (or "drive:/" for Win32), the
    15	# server will use that explicit path.  If the filenames do *not* begin
    16	# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    17	# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    18	# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
    19	# will be interpreted as '/logs/access_log'.
    20	
    21	#
    22	# ServerRoot: The top of the directory tree under which the server's
    23	# configuration, error, and log files are kept.
    24	#
    25	# Do not add a slash at the end of the directory path.  If you point
    26	# ServerRoot at a non-local disk, be sure to specify a local disk on the
    27	# Mutex directive, if file-based mutexes are used.  If you wish to share the
    28	# same ServerRoot for multiple httpd daemons, you will need to change at
    29	# least PidFile.
    30	#
    31	ServerRoot "/usr/local/apache"
    32	
    33	#
    34	# Mutex: Allows you to set the mutex mechanism and mutex file directory
    35	# for individual mutexes, or change the global defaults
    36	#
    37	# Uncomment and change the directory if mutexes are file-based and the default
    38	# mutex file directory is not on a local disk or is not appropriate for some
    39	# other reason.
    40	#
    41	# Mutex default:logs
    42	
    43	#
    44	# Listen: Allows you to bind Apache to specific IP addresses and/or
    45	# ports, instead of the default. See also the <VirtualHost>
    46	# directive.
    47	#
    48	# Change this to Listen on specific IP addresses as shown below to 
    49	# prevent Apache from glomming onto all bound IP addresses.
    50	#
    51	#Listen 12.34.56.78:80
    52	Listen 80
    53	
    54	#
    55	# Dynamic Shared Object (DSO) Support
    56	#
    57	# To be able to use the functionality of a module which was built as a DSO you
    58	# have to place corresponding `LoadModule' lines at this location so the
    59	# directives contained in it are actually available _before_ they are used.
    60	# Statically compiled modules (those listed by `httpd -l') do not need
    61	# to be loaded here.
    62	#
    63	# Example:
    64	# LoadModule foo_module modules/mod_foo.so
    65	#
    66	LoadModule authn_file_module modules/mod_authn_file.so
    67	#LoadModule authn_dbm_module modules/mod_authn_dbm.so
    68	#LoadModule authn_anon_module modules/mod_authn_anon.so
    69	#LoadModule authn_dbd_module modules/mod_authn_dbd.so
    70	#LoadModule authn_socache_module modules/mod_authn_socache.so
    71	LoadModule authn_core_module modules/mod_authn_core.so
    72	LoadModule authz_host_module modules/mod_authz_host.so
    73	LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    74	LoadModule authz_user_module modules/mod_authz_user.so
    75	#LoadModule authz_dbm_module modules/mod_authz_dbm.so
    76	#LoadModule authz_owner_module modules/mod_authz_owner.so
    77	#LoadModule authz_dbd_module modules/mod_authz_dbd.so
    78	LoadModule authz_core_module modules/mod_authz_core.so
    79	LoadModule access_compat_module modules/mod_access_compat.so
    80	LoadModule auth_basic_module modules/mod_auth_basic.so
    81	#LoadModule auth_form_module modules/mod_auth_form.so
    82	#LoadModule auth_digest_module modules/mod_auth_digest.so
    83	#LoadModule allowmethods_module modules/mod_allowmethods.so
    84	#LoadModule file_cache_module modules/mod_file_cache.so
    85	#LoadModule cache_module modules/mod_cache.so
    86	#LoadModule cache_disk_module modules/mod_cache_disk.so 
    87	LoadModule socache_shmcb_module modules/mod_socache_shmcb.so 
    88	#LoadModule socache_dbm_module modules/mod_socache_dbm.so
    89	#LoadModule socache_memcache_module modules/mod_socache_memcache.so
    90	#LoadModule dbd_module modules/mod_dbd.so
    91	#LoadModule dumpio_module modules/mod_dumpio.so
    92	#LoadModule buffer_module modules/mod_buffer.so
    93	#LoadModule ratelimit_module modules/mod_ratelimit.so
    94	LoadModule reqtimeout_module modules/mod_reqtimeout.so
    95	#LoadModule ext_filter_module modules/mod_ext_filter.so
    96	#LoadModule request_module modules/mod_request.so
    97	LoadModule include_module modules/mod_include.so
    98	LoadModule filter_module modules/mod_filter.so
    99	#LoadModule substitute_module modules/mod_substitute.so
   100	#LoadModule sed_module modules/mod_sed.so
   101	#LoadModule deflate_module modules/mod_deflate.so
   102	LoadModule mime_module modules/mod_mime.so
   103	LoadModule log_config_module modules/mod_log_config.so
   104	#LoadModule log_debug_module modules/mod_log_debug.so
   105	#LoadModule logio_module modules/mod_logio.so
   106	LoadModule env_module modules/mod_env.so
   107	#LoadModule expires_module modules/mod_expires.so
   108	LoadModule headers_module modules/mod_headers.so
   109	#LoadModule unique_id_module modules/mod_unique_id.so
   110	LoadModule setenvif_module modules/mod_setenvif.so
   111	LoadModule version_module modules/mod_version.so
   112	#LoadModule remoteip_module modules/mod_remoteip.so
   113	#LoadModule proxy_module modules/mod_proxy.so
   114	#LoadModule proxy_connect_module modules/mod_proxy_connect.so
   115	#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
   116	#LoadModule proxy_http_module modules/mod_proxy_http.so
   117	#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
   118	#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
   119	#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
   120	#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
   121	#LoadModule proxy_express_module modules/mod_proxy_express.so
   122	#LoadModule session_module modules/mod_session.so
   123	#LoadModule session_cookie_module modules/mod_session_cookie.so
   124	#LoadModule session_dbd_module modules/mod_session_dbd.so
   125	#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so 
   126	LoadModule ssl_module modules/mod_ssl.so 
   127	#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
   128	#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
   129	#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
   130	#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
   131	LoadModule unixd_module modules/mod_unixd.so
   132	#LoadModule dav_module modules/mod_dav.so
   133	LoadModule status_module modules/mod_status.so
   134	LoadModule autoindex_module modules/mod_autoindex.so
   135	#LoadModule info_module modules/mod_info.so
   136	#LoadModule suexec_module modules/mod_suexec.so
   137	LoadModule cgi_module modules/mod_cgi.so
   138	#LoadModule dav_fs_module modules/mod_dav_fs.so
   139	#LoadModule vhost_alias_module modules/mod_vhost_alias.so
   140	LoadModule negotiation_module modules/mod_negotiation.so
   141	LoadModule dir_module modules/mod_dir.so
   142	#LoadModule actions_module modules/mod_actions.so
   143	#LoadModule speling_module modules/mod_speling.so
   144	LoadModule userdir_module modules/mod_userdir.so
   145	LoadModule alias_module modules/mod_alias.so
   146	#LoadModule rewrite_module modules/mod_rewrite.so
   147	
   148	<IfModule unixd_module>
   149	#
   150	# If you wish httpd to run as a different user or group, you must run
   151	# httpd as root initially and it will switch.  
   152	#
   153	# User/Group: The name (or #number) of the user/group to run httpd as.
   154	# It is usually good practice to create a dedicated user and group for
   155	# running httpd, as with most system services.
   156	#
   157	User www
   158	Group www
   159	
   160	</IfModule>
   161	
   162	# 'Main' server configuration
   163	#
   164	# The directives in this section set up the values used by the 'main'
   165	# server, which responds to any requests that aren't handled by a
   166	# <VirtualHost> definition.  These values also provide defaults for
   167	# any <VirtualHost> containers you may define later in the file.
   168	#
   169	# All of these directives may appear inside <VirtualHost> containers,
   170	# in which case these default settings will be overridden for the
   171	# virtual host being defined.
   172	#
   173	
   174	#
   175	# ServerAdmin: Your address, where problems with the server should be
   176	# e-mailed.  This address appears on some server-generated pages, such
   177	# as error documents.  e.g. admin@your-domain.com
   178	#
   179	ServerAdmin iseki@rsch.tuis.ac.jp
   180	
   181	#
   182	# ServerName gives the name and port that the server uses to identify itself.
   183	# This can often be determined automatically, but we recommend you specify
   184	# it explicitly to prevent problems during startup.
   185	#
   186	# If your host doesn't have a registered DNS name, enter its IP address here.
   187	#
   188	ServerName www.th.np.tuis.ac.jp:80
   189	
   190	#
   191	# Deny access to the entirety of your server's filesystem. You must
   192	# explicitly permit access to web content directories in other 
   193	# <Directory> blocks below.
   194	#
   195	<Directory />
   196	    AllowOverride none
   197	    Require all denied
   198	</Directory>
   199	
   200	#
   201	# Note that from this point forward you must specifically allow
   202	# particular features to be enabled - so if something's not working as
   203	# you might expect, make sure that you have specifically enabled it
   204	# below.
   205	#
   206	
   207	#
   208	# DocumentRoot: The directory out of which you will serve your
   209	# documents. By default, all requests are taken from this directory, but
   210	# symbolic links and aliases may be used to point to other locations.
   211	#
   212	DocumentRoot "/home/apache/htdocs"
   213	<Directory "/home/apache/htdocs">
   214	    #
   215	    # Possible values for the Options directive are "None", "All",
   216	    # or any combination of:
   217	    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
   218	    #
   219	    # Note that "MultiViews" must be named *explicitly* --- "Options All"
   220	    # doesn't give it to you.
   221	    #
   222	    # The Options directive is both complicated and important.  Please see
   223	    # http://httpd.apache.org/docs/2.4/mod/core.html#options
   224	    # for more information.
   225	    #
   226	    Options FollowSymLinks ExecCGI MultiViews
   227	
   228	    #
   229	    # AllowOverride controls what directives may be placed in .htaccess files.
   230	    # It can be "All", "None", or any combination of the keywords:
   231	    #   Options FileInfo AuthConfig Limit
   232	    #
   233	    AllowOverride All
   234	
   235	    #
   236	    # Controls who can get stuff from this server.
   237	    #
   238	    Require all granted
   239	</Directory>
   240	
   241	#
   242	# DirectoryIndex: sets the file that Apache will serve if a directory
   243	# is requested.
   244	#
   245	<IfModule dir_module>
   246	    DirectoryIndex  index.html index.htm index.shtml index.php
   247	</IfModule>
   248	
   249	#
   250	# The following lines prevent .htaccess and .htpasswd files from being 
   251	# viewed by Web clients. 
   252	#
   253	<Files ".ht*">
   254	    Require all denied
   255	</Files>
   256	
   257	#
   258	# ErrorLog: The location of the error log file.
   259	# If you do not specify an ErrorLog directive within a <VirtualHost>
   260	# container, error messages relating to that virtual host will be
   261	# logged here.  If you *do* define an error logfile for a <VirtualHost>
   262	# container, that host's errors will be logged there and not here.
   263	#
   264	ErrorLog "| /usr/local/apache/bin/rotatelogs logs/error_log 604800" 
   265	
   266	#
   267	# LogLevel: Control the number of messages logged to the error_log.
   268	# Possible values include: debug, info, notice, warn, error, crit,
   269	# alert, emerg.
   270	#
   271	LogLevel warn
   272	
   273	<IfModule log_config_module>
   274	    #
   275	    # The following directives define some format nicknames for use with
   276	    # a CustomLog directive (see below).
   277	    #
   278	    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
   279	    LogFormat "%h %l %u %t \"%r\" %>s %b" common
   280	
   281	    <IfModule logio_module>
   282	      # You need to enable mod_logio.c to use %I and %O
   283	      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
   284	    </IfModule>
   285	
   286	    #
   287	    # The location and format of the access logfile (Common Logfile Format).
   288	    # If you do not define any access logfiles within a <VirtualHost>
   289	    # container, they will be logged here.  Contrariwise, if you *do*
   290	    # define per-<VirtualHost> access logfiles, transactions will be
   291	    # logged therein and *not* in this file.
   292	    #
   293	    #CustomLog "logs/access_log" common
   294	
   295	    #
   296	    # If you prefer a logfile with access, agent, and referer information
   297	    # (Combined Logfile Format) you can use the following directive.
   298	    #
   299	    CustomLog "logs/access_log" combined
            # Log Rotation
            TransferLog "| /usr/local/apache/bin/rotatelogs logs/access_log 604800"
   300	</IfModule>
   301	
   302	<IfModule alias_module>
   303	    #
   304	    # Redirect: Allows you to tell clients about documents that used to 
   305	    # exist in your server's namespace, but do not anymore. The client 
   306	    # will make a new request for the document at its new location.
   307	    # Example:
   308	    # Redirect permanent /foo http://www.example.com/bar
   309	
   310	    #
   311	    # Alias: Maps web paths into filesystem paths and is used to
   312	    # access content that does not live under the DocumentRoot.
   313	    # Example:
   314	    # Alias /webpath /full/filesystem/path
   315	    #
   316	    # If you include a trailing / on /webpath then the server will
   317	    # require it to be present in the URL.  You will also likely
   318	    # need to provide a <Directory> section to allow access to
   319	    # the filesystem path.
   320	
   321	    #
   322	    # ScriptAlias: This controls which directories contain server scripts. 
   323	    # ScriptAliases are essentially the same as Aliases, except that
   324	    # documents in the target directory are treated as applications and
   325	    # run by the server when requested rather than as documents sent to the
   326	    # client.  The same rules about trailing "/" apply to ScriptAlias
   327	    # directives as to Alias.
   328	    #
   329	    ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
   330	
   331	</IfModule>
   332	
   333	<IfModule cgid_module>
   334	    #
   335	    # ScriptSock: On threaded servers, designate the path to the UNIX
   336	    # socket used to communicate with the CGI daemon of mod_cgid.
   337	    #
   338	    #Scriptsock logs/cgisock
   339	</IfModule>
   340	
   341	#
   342	# "/usr/local/apache/cgi-bin" should be changed to whatever your ScriptAliased
   343	# CGI directory exists, if you have that configured.
   344	#
   345	<Directory "/usr/local/apache/cgi-bin">
   346	    AllowOverride None
   347	    Options None
   348	    Require all granted
   349	</Directory>
   350	
   351	<IfModule mime_module>
   352	    #
   353	    # TypesConfig points to the file containing the list of mappings from
   354	    # filename extension to MIME-type.
   355	    #
   356	    TypesConfig conf/mime.types
   357	
   358	    #
   359	    # AddType allows you to add to or override the MIME configuration
   360	    # file specified in TypesConfig for specific file types.
   361	    #
   362	    #AddType application/x-gzip .tgz
   363	    #
   364	    # AddEncoding allows you to have certain browsers uncompress
   365	    # information on the fly. Note: Not all browsers support this.
   366	    #
   367	    #AddEncoding x-compress .Z
   368	    #AddEncoding x-gzip .gz .tgz
   369	    #
   370	    # If the AddEncoding directives above are commented-out, then you
   371	    # probably should define those extensions to indicate media types:
   372	    #
   373	    AddType application/x-compress .Z
   374	    AddType application/x-gzip .gz .tgz
            AddType application/x-java-archive .jar
            AddType application/x-httpd-php .php .php4
            AddType application/x-httpd-php-source .phps .php4s
   375	
   376	    #
   377	    # AddHandler allows you to map certain file extensions to "handlers":
   378	    # actions unrelated to filetype. These can be either built into the server
   379	    # or added with the Action directive (see below)
   380	    #
   381	    # To use CGI scripts outside of ScriptAliased directories:
   382	    # (You will also need to add "ExecCGI" to the "Options" directive.)
   383	    #
   384	    AddHandler cgi-script .cgi
      	    AddHandler cgi-script .pl
   385	
   386	    # For type maps (negotiated resources):
   387	    #AddHandler type-map var
   388	
   389	    #
   390	    # Filters allow you to process content before it is sent to the client.
   391	    #
   392	    # To parse .shtml files for server-side includes (SSI):
   393	    # (You will also need to add "Includes" to the "Options" directive.)
   394	    #
   395	    AddType text/html .shtml
   396	    AddOutputFilter INCLUDES .shtml
   397	</IfModule>
   398	
   399	#
   400	# The mod_mime_magic module allows the server to use various hints from the
   401	# contents of the file itself to determine its type.  The MIMEMagicFile
   402	# directive tells the module where the hint definitions are located.
   403	#
   404	#MIMEMagicFile conf/magic
   405	
   406	#
   407	# Customizable error responses come in three flavors:
   408	# 1) plain text 2) local redirects 3) external redirects
   409	#
   410	# Some examples:
   411	#ErrorDocument 500 "The server made a boo boo."
   412	#ErrorDocument 404 /missing.html
   413	#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
   414	#ErrorDocument 402 http://www.example.com/subscription_info.html
   415	#
   416	
   417	#
   418	# MaxRanges: Maximum number of Ranges in a request before
   419	# returning the entire resource, or one of the special
   420	# values 'default', 'none' or 'unlimited'.
   421	# Default setting is to accept 200 Ranges.
   422	#MaxRanges unlimited
   423	
   424	#
   425	# EnableMMAP and EnableSendfile: On systems that support it, 
   426	# memory-mapping or the sendfile syscall may be used to deliver
   427	# files.  This usually improves server performance, but must
   428	# be turned off when serving from networked-mounted 
   429	# filesystems or if support for these functions is otherwise
   430	# broken on your system.
   431	# Defaults: EnableMMAP On, EnableSendfile Off
   432	#
   433	#EnableMMAP off
   434	#EnableSendfile on
   435	
   436	# Supplemental configuration
   437	#
   438	# The configuration files in the conf/extra/ directory can be 
   439	# included to add extra features or to modify the default configuration of 
   440	# the server, or you may simply copy their contents here and change as 
   441	# necessary.
   442	
   443	# Server-pool management (MPM specific)
   444	#Include conf/extra/httpd-mpm.conf
   445	
   446	# Multi-language error messages
   447	#Include conf/extra/httpd-multilang-errordoc.conf
   448	
   449	# Fancy directory listings
   450	Include conf/extra/httpd-autoindex.conf
   451	
   452	# Language settings
   453	Include conf/extra/httpd-languages.conf
   454	
   455	# User home directories
   456	Include conf/extra/httpd-userdir.conf
   457	
   458	# Real-time info on requests and configuration
   459	#Include conf/extra/httpd-info.conf
   460	
   461	# Virtual hosts
   462	#Include conf/extra/httpd-vhosts.conf
   463	
   464	# Local access to the Apache HTTP Server Manual
   465	#Include conf/extra/httpd-manual.conf
   466	
   467	# Distributed authoring and versioning (WebDAV)
   468	#Include conf/extra/httpd-dav.conf
   469	
   470	# Various default settings
   471	Include conf/extra/httpd-default.conf
   472	
   473	# Configure mod_proxy_html to understand HTML4/XHTML1
   474	<IfModule proxy_html_module>
   475	Include conf/extra/proxy-html.conf
   476	</IfModule>
   477	
        # for Tomcat Connector
        Include /usr/local/tomcat/conf/mod_jk.conf
   478	# Secure (SSL/TLS) connections
   479	Include conf/extra/httpd-ssl.conf
   480	#
   481	# Note: The following must must be present to support
   482	#       starting without SSL on platforms with no /dev/random equivalent
   483	#       but a statically compiled-in mod_ssl.
   484	#
   485	<IfModule ssl_module>
   486	SSLRandomSeed startup builtin
   487	SSLRandomSeed connect builtin
   488	</IfModule>